THIS VALVE CONTROLS SUPPLY TO AUTOMATIC SPRINKLERS SIGN (ALUMINUM SIGNS 7 X 10)

 “THIS VALVE CONTROLS SUPPLY TO AUTOMATIC SPRINKLERS_MUST BE OPEN AT ALL TIMES TO BE HANDLED ONLY BY AUTHORIZED PERSON OR BY EMPLOYEE CARING FOR SPRINKLER SYSTEM IN CASE OF FIRE DO NOT SHUT VALVE UNTIL FIRE IS ENTIRELY OUT WHEN VALVE IS SHUT FOR EMERGENCY REPAIRS OR FIRE NOTIFY:_REQUEST DIRECTION RESTORE PROTECTION QUICKLY” SIGN

SPRINKLER CONTROL VALVE SIGN

Size 7 Inch x 10 Inch

Sign Material: Aluminium

Sign has mounting holes in each corner.

Round Corner

Sign Thickness 0.02''

Sign letters color: WHITE

Sign background color: RED

Sign Type: Wall Mounted       

HPD Required sign: NO (See Law and regulations)

DOB NYC Required sign: NO (For more details see law and regulations)

Fire Department required sign: YES (For more details see law and regulations)

Required signs for restaurant and bars- N/A (See Law and regulations)

DOT Required Sign: NO (See Law and regulations)

DSNY Required Sign: NO (See Law and regulations)

     SKU: MDL NYC HMC NYC FD7-100007

  UPC: 602927406172

Sign Group: Property Management Signs, Fire Department Signs, Equipment Signs, Sprinkler Supply Signs, Keep Open Signs, Red Background Signs, Building Signs, Aluminum Safety Tags & Labels, Safety Signs, Sprinklers Main Control Signs, Restore Protection Quickly Signs, Automatic sprinklers supply control valve signs, Aluminum Equipment Tags/Labels, Do Not Close Signs, Auto Sprinkler Main Control Valve Signs, VALVE CONTROLLING SUPPLY TO AUTOMATIC SPRINKLERS SIGNS, Sprinkler Supply Controlling Valve Signs, Safety Instruction Signs, Control Signs, Authorized Personnel and Employees Only Signs, Supply Valve Identification Signs

This is a sturdy THIS VALVE CONTROLS AUTOMATIC SPRINKLERS FIRE DEPARTMENT SIGN - RED BACKGROUND WITH WHITE LETTERS (MATERIAL IS STURDY ALUMINUM; size is 7'' x 10'') WITH ONE HOLE IN EACH CORNER. The thickness of the sign is 0.02''. This “THIS VALVE MUST BE OPEN AT ALL TIMES” sign is required by the Fire Department and is made from a type of ALUMINUM, which is exceptionally sturdy. The sign is for both indoor and outdoor use.

Install a SPRINKLER SYSTEM sign to stay compliant with the relevant laws, regulations and recommendations in force in NYC. Maintain the safety levels required by different federal and municipal agencies and institutions that observe and enforce the law.

Our THIS VALVE CONTROLS SUPPLY TO AUTOMATIC SPRINKLERS signage comes with four pre- drill holes, which allow you to either use screws and install sign on walls behind relevant equipment or use Jack Chain/Sturdy Wire and install sign on the equipment it refers to, in which case you can simply hang sign where it belongs.

This is an aluminum “THIS VALVE CONTROLS SUPPLY TO AUTOMATIC SPRINKLERS MUST BE OPEN AT ALL TIMES TO BE HANDLED ONLY BY AUTHORIZED PERSON OR BY EMPLOYEE CARING FOR SPRINKLER SYSTEM IN CASE OF FIRE DO NOT SHUT VALVE UNTIL FIRE IS ENTIRELY OUT” SIGN 

This is an aluminum "THIS VALVE CONTROLS SUPPLY TO AUTOMATIC SPRINKLERS" SIGN with holes for heavy duty installation. In NYC use/ post sign to inform tenants/owners/guests/officers/Fire Department Crew of sprinkler supply controlling valve in facility with proper HPD designation and aluminum signs

For more Information concerning the NYC Fire Department code CLICK HERE

Fire Sprinkler Signs- The signs are designed to identify different controls and pipes for fire sprinkler systems in your facility. A fire sprinkler or sprinkler head is the component of a fire sprinkler system that discharges water when the effects of a fire have been detected. Many states require owners to install clear signs identifying the different types of fire sprinklers used.

There are various types of fire systems. 4 of them are described below:

Dry Pipe Sprinkler system-Dry pipe sprinklers are similar to pre-action systems as they use pressurized air in the pipe which exits before water escapes. This causes a minute delay in water discharge but is ideal for buildings with low temperatures so the pipes do not freeze. These fire sprinkler systems have a fast opening tool to get rid of the air and speed up the flow of water. Warehouses located in the north are a good example of what buildings should use dry pipe sprinklers.

Wet Pipe Sprinkler system-Wet pipe fire sprinklers constantly have water in them. This allows for a quick reaction to a fire and is the most common type of sprinkler installed in buildings. A type of building that uses the wet pipe system is a high-rise or office building with a few floors. This fire sprinkler system is cost efficient and low maintenance.

Pre-action fire sprinkler system-Pre-action fire sprinkler systems are filled with air and water is allowed to pass through when the smoke alarm or detector goes off. This type of system requires two triggers to start water flow. It helps greatly that the pre-action fire sprinkler can be set to prevent water from spouting in case of a false alarm or a mechanical failure. The pre-action system is good for use in places where the sprinklers are only necessary when there is an actual fire so other items in the building do not get water damage from an accidental sprinkling. Such buildings include libraries and data centers. These places contain items of high value like electronics and goods damageable by water such as books

Deluge Fire Sprinkler -These types of fire sprinkler systems also need a smoke or heat detector like the pre-action system. A deluge system has open nozzles that can be used when a hazard is present. When flammable liquids are spread across a floor, deluge fire sprinklers are good to have. In that case, buildings such as industrial parks and buildings with many tanks have deluge fire sprinkler systems installed.

Automatic sprinkler signs – the signs are designed to inform 1st respondents of the sprinkler system at hand. Automatic Fire Sprinkler Systems present a network of water-filled pipes which starts at domestic water service lines and ends with strategically spaced fire sprinkler heads located throughout pertinent building.

 Shipping and Handling Cost:

Our Shipping is fixed whether you buy 1 item or 20 items (We ship within USA only) - do not miss this opportunity to buy all signs needed at no additional shipping cost.

Sales Tax:

We are required to collect sales tax on any product sold on this site and shipped to an address in New York. The sales tax is 8.875 percent.

Notice:

The requirements for sign content are determined by intended use and by applicable regulation. The BUYER is responsible for determining the appropriate content for a sign or package of signs.  HPDSigns.com makes no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. Please review terms and conditions prior to purchase. 

For more information about what is required, see the laws that are referenced and the rules applicable to your city and state. This page is for informational purposes only and is not intended as legal advice, professional advice or a statement of law. You may wish to consult with an attorney.

Find us on:

Google 

This is an aluminum “THIS VALVE CONTROLS SUPPLY TO AUTOMATIC SPRINKLERS” SIGN with holes for heavy duty installation. In NYC use/post sign to inform tenants/owners/guests/officers of auto sprinkler supply control valve in facility with proper HPD designation and aluminum signs