SPRINKLER STANDPIPE RISER CONTROL VALVE SIGN (ALUMINUM SIGNS 14X10)
SPRINKLER STANDPIPE RISER CONTROL VALVE SIGN (REFLECTIVE ALUMINUM SIGNS 14 X 10)
Size 14 inch x 10 inch
Sign has mounting holes in each corner.
Sign Thickness 0.02''
Sign letters color: WHITE
Sign background color: RED
Sign material: Aluminium
Sign Type: Wall Mounted
Reflective Sign: Yes
0.02'' rustproof aluminum
Standard Engineer Grade reflective
Rounded corners for easy handling and a professional appearance
Sign has pre-punched holes to insure a hassle-free installation
HPD Required sign: NO (See Law and regulations)
DOB NYC Required sign: NO (See Law and regulations)
Fire Department required sign: YES (See Law and regulations)
REQUIRED SIGNS for RESTAURANTS & BARS - N/A (See Law and regulations)
DOT Required Sign: NO (See Law and regulations)
DSNY Required Sign: NO (See Law and regulations)
SKU: HMC NYC MDL NYC 10-14-8301221
Sign Group: Fire Department Signs, Reflective Signs, Standpipe Identification Signs, Red Background Signs, Fire Riser Room Signs, Equipment Identification Signs, Sprinkler/Standpipe riser control valve signs, Control Valve Identification Signs, Sprinkler Identification Signs
This is a reflective aluminum “SPRINKLER STANDPIPE RISER CONTROL VALVE” SIGN with holes for installation. In NYC use/post sign to inform of standpipe sprinkler control valve in facility with aluminum reflective signs/Riser control valve signs
Our SPRINKLER STANDPIPE RISER CONTROL VALVE reflective signage comes with four pre-drill holes, which allow you to either use screws and install aluminum sign on walls behind relevant equipment or use Jack Chain/Sturdy Wire and install sign on the equipment it refers to, in which case you can simply hang it where it belongs.
Install a SPRINKLER STANDPIPE RISER CONTROL VALVE reflective aluminum sign to stay compliant with the relevant laws, regulations and recommendations in force in NYC. Maintain the safety levels required by different federal and municipal agencies and institutions that observe and enforce the law.
This is a sturdy SPRINKLER STANDPIPE RISER CONTROL VALVE reflective aluminum sign with RED background, WHITE letters and 4 holes for heavy duty installation. It is a size 14''X10'' aluminum reflective sign. It is 0.02 inches thick. It is a sign made of sturdy aluminum.
Fire Sprinkler Signs- The signs are designed to identify different controls and pipes for fire sprinkler systems in your facility. A fire sprinkler or sprinkler head is the component of a fire sprinkler system that discharges water when the effects of a fire have been detected. Many states require owners to install clear signs identifying the different types of fire sprinklers used.
There are various types of fire systems. 4 of them are described below:
Dry Pipe Sprinkler system-Dry pipe sprinklers are similar to pre-action systems as they use pressurized air in the pipe which exits before water escapes. This causes a minute delay in water discharge but is ideal for buildings with low temperatures so the pipes do not freeze. These fire sprinkler systems have a fast opening tool to get rid of the air and speed up the flow of water. Warehouses located in the north are a good example of what buildings should use dry pipe sprinklers.
Wet Pipe Sprinkler system-Wet pipe fire sprinklers constantly have water in them. This allows for a quick reaction to a fire and is the most common type of sprinkler installed in buildings. A type of building that uses the wet pipe system is a high-rise or office building with a few floors. This fire sprinkler system is cost efficient and low maintenance.
Pre-action fire sprinkler system-Pre-action fire sprinkler systems are filled with air and water is allowed to pass through when the smoke alarm or detector goes off. This type of system requires two triggers to start water flow. It helps greatly that the pre-action fire sprinkler can be set to prevent water from spouting in case of a false alarm or a mechanical failure. The pre-action system is good for use in places where the sprinklers are only necessary when there is an actual fire so other items in the building do not get water damage from an accidental sprinkling. Such buildings include libraries and data centers. These places contain items of high value like electronics and goods damageable by water such as books
Deluge Fire Sprinkler -These types of fire sprinkler systems also need a smoke or heat detector like the pre-action system. A deluge system has open nozzles that can be used when a hazard is present. When flammable liquids are spread across a floor, deluge fire sprinklers are good to have. In that case, buildings such as industrial parks and buildings with many tanks have deluge fire sprinkler systems installed.
Automatic Sprinkler control valve signs – These signs are designed to inform the fire department of the location and designation of the valve of the flow of water from mainline to each zone.
What is a sprinkler riser room? In a nutshell, a fire sprinkler riser room is a space designated for fire protection equipment situated on an outside wall at grade with direct exterior access. A water motor gong, or a bell that sounds when water flows through the sprinkler system is often installed on the outside wall of the sprinkler riser room.
How does a fire sprinkler riser work? As a fire sprinkler discharges, water flows out of the pipe or or branch line, to which it is connected. When this happens water moves through the system riser to refill the branch line. The resulting changes in flow and pressure are monitored at the riser by electronic devices called water flow switches.
What is the difference between dry riser systems and wet riser system/ Dry and wet risers ? A dry riser is made up of a system of valves and pipework that enable the Fire Service to pump water up to upper floors of the building at hand. A wet riser is made up of a system of valves and pipework that are kept permanently filled with water
Shipping and Handling Cost:
Our Shipping is fixed whether you buy 1 item or 20 items (We ship within USA only) - do not miss this opportunity to buy all signs needed at no additional shipping cost.
We are required to collect sales tax on any product sold on this site and shipped to an address in New York. The sales tax is 8.875 percent.
The requirements for sign content are determined by intended use and by applicable regulation. The BUYER is responsible for determining the appropriate content for a sign or package of signs. Firedepartmentsigns.nyc makes no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. Please review terms and conditions prior to purchase.
We provide both signs required by city and state regulation and Fire Department Signs, Reflective Signs, Standpipe Identification Signs, Red Background Signs, Fire Riser Room Signs, Equipment Identification Signs, Sprinkler/Standpipe riser control valve signs, Control Valve Identification Signs and Sprinkler Identification Signs
For more information about what is required, see the laws that are referenced and the rules applicable to your city and state. This page is for informational purposes only and is not intended as legal advice, professional advice or a statement of law. You may wish to consult with an attorney.
Find us on:
This is a an aluminum “SPRINKLER STANDPIPE RISER CONTROL VALVE” SIGN with holes for installation. In NYC use/ post sign to inform tenants/owners/guests/officers/Fire Department Crew of control valve standpipe/sprinkler equipment in facility with proper HPD designation and aluminum signs