OPEN SPRINKLER DRAIN SIGN (ALUMINUM SIGN SIZED 2X7)

$4.99

SPRINKLER SIGN: OPEN SPRINKLER DRAIN SIGN (2 X 7)

Size 2 Inch x 7 Inch

Sign Material: Aluminium

Sign Thickness 0.5 MM

Sign letters color: RED

Sign background color: WHITE

Sign Type: Wall Mounted

HPD Required sign: NO

DOB NYC Required sign: YES (See Law and regulations- for more detail)

Fire Department required sign: YES (See Law and regulations- for more detail)

Required signs for restaurant and bars- NO

Sign Group: NYC Fire Department Signs, NYC DOB required sign, NYC Sprinklers signs , and NYC Fire department required signs.

SKU: FD2-70061

UPC: 602927405762

For More Information about NYC Fire Department code and NYC Sprinkler signs - CLICK HERE

Fire Sprinkler Signs- The signs are designed to identify different controls and pipes for fire sprinkler systems in your facility. A fire sprinkler or sprinkler head is the component of a fire sprinkler system that discharges water when the effects of a fire have been detected. Many states require owners to install clear signs identifying the different types of fire sprinklers used.

There are various types of fire systems. 4 of them are described below:

Dry Pipe Sprinkler system-Dry pipe sprinklers are similar to pre-action systems as they use pressurized air in the pipe which exits before water escapes. This causes a minute delay in water discharge but is ideal for buildings with low temperatures so the pipes do not freeze. These fire sprinkler systems have a fast opening tool to get rid of the air and speed up the flow of water. Warehouses located in the north are a good example of what buildings should use dry pipe sprinklers.

Wet Pipe Sprinkler system-Wet pipe fire sprinklers constantly have water in them. This allows for a quick reaction to a fire and is the most common type of sprinkler installed in buildings. A type of building that uses the wet pipe system is a high-rise or office building with a few floors. This fire sprinkler system is cost efficient and low maintenance.

Pre-action fire sprinkler system-Pre-action fire sprinkler systems are filled with air and water is allowed to pass through when the smoke alarm or detector goes off. This type of system requires two triggers to start water flow. It helps greatly that the pre-action fire sprinkler can be set to prevent water from spouting in case of a false alarm or a mechanical failure. The pre-action system is good for use in places where the sprinklers are only necessary when there is an actual fire so other items in the building do not get water damage from an accidental sprinkling. Such buildings include libraries and data centers. These places contain items of high value like electronics and goods damageable by water such as books

Deluge Fire Sprinkler -These types of fire sprinkler systems also need a smoke or heat detector like the pre-action system. A deluge system has open nozzles that can be used when a hazard is present. When flammable liquids are spread across a floor, deluge fire sprinklers are good to have. In that case, buildings such as industrial parks and buildings with many tanks have deluge fire sprinkler systems installed.

The Drain signs are designed to inform the Fire department and the maintenance team of the lower location to drain the system. The Drain Valve is used to drain lines for maintenance or Prevent freeze damage to piping; Easy to install at lowest point in piping systems. A drain pipe is used to further prevent water from freezing inside a system.

Frequently asked questions about drain pipe systems and drain signs related:

Do you have to drain sprinkler system?

To minimize the risk of freeze damage, you'll need to winterize your irrigation system. In areas where winterization is mandatory, irrigation systems are installed using one of three types of water removal: manual drain, auto drain, or blowout. If you don't know your system type, it is wise to use the blowout method.

How long does it take to drain a sprinkler system?

Winterizing your sprinkler system is usually done within 30 minutes. Winterizing an irrigation system involves the clearing of the relevant irrigation pipes of water to prevent pipes from freezing.

What is a sprinkler drain ?

Sprinkler Drain Valves are used to drain irrigation lines after each use. They prevent freeze damage to sprinklers and piping; Easy to install at lowest point in piping systems; Drain pipes and sprinklers to prevent water from freezing inside an irrigation system.

What is a Drain valve - A valve used to drain off material such as water gas, or one used to empty a process line, a sprinkler system or a storage tank.

What is a boiler drain valve used for and what are Boiler Drain Valves?

Brass boiler drain valves, also called drain cocks, are used with boilers, water heaters and storage tanks or simply installed in line to drain water in a plumbing or heating system.

What is a test and drain valve?

A Test and Drain valve is a type of valve with both a test function and an express drain function. In a sense it also presents a convenient ball valve and inspector’s test valve combination manufactured as one unit.

Shipping and Handling Cost:

Our Shipping is fixed whether you buy 1 item or 20 items (We Ship within USA Only) - do not miss this opportunity to buy all signs needed at no additional shipping cost.

Sales Tax:

We are required to collect sales tax on any product sold on this site and shipped to an address in New York. The sales tax is 8.875 percent.

The requirements for sign content are determined by intended use and by applicable regulation. The BUYER is responsible for determining the appropriate content for a sign or package of signs. Firedepartmentsigns.nyc makes no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. Please review terms and conditions prior to purchase.

For more information about what is required, see the laws that are referenced and the rules applicable to your city and state. This page is for informational purposes only and is not intended as legal advice or as a statement of law. You may wish to consult with an attorney.

WE ARE THE OFFICIAL SITE FOR FIRE DEPARTMENT SIGNS. FIRE DEPARTMENT SIGNS will provide you with all FIRE DEPARTMENT required signs, NYC Building required signs, CALIFORNIA FIRE DEPARTMENT required signs, TEXAS FIRE DEPARTMENT required signs and all sprinkler required signs. We offer a wide range of sprinkler signs, fire department connection signs, Siamese signs, Standpipe signs, sprinkler tag signs, fire exit signs, FDC signs, fire door signs and stairwell signs. We offer all signs made mandatory by the City and state building department. We are the biggest building Management signs provider in the world.

Find us on:

Google

This is an aluminum “OPEN SPRINKLER DRAIN” SIGN with holes for heavy duty installation. In NYC use/post sign to inform tenants/owners/guests/officers of drain sprinkler open in facility with proper HPD designation and aluminum signs