FIRE ALARM CONTROL PANEL INSIDE SIGN- REFLECTIVE !!! (ALUMINUM SIGNS 10X12)
FIRE ALARM CONTROL PANEL INSIDE SIGN (REFLECTIVE ALUMINUM SIGNS 7 X 10)
Size 7 inch x 10 inch
Sign has mounting holes in each corner.
Sign Thickness 0.02''
Sign letters color: WHITE
Sign background color: RED
Sign material: Aluminium
Sign Type: Wall Mounted
Reflective Sign: Yes
0.02'' rustproof aluminum
Standard Engineer Grade reflective
Rounded corners for easy handling and a professional appearance
Sign has pre-punched holes to insure a hassle-free installation
HPD Required sign: NO (See Law and regulations)
DOB NYC Required sign: NO (See Law and regulations)
Fire Department required sign: YES (See Law and regulations)
REQUIRED SIGNS for RESTAURANTS & BARS - N/A (See Law and regulations)
DOT Required Sign: NO (See Law and regulations)
DSNY Required Sign: NO (See Law and regulations)
SKU: HMC NYC MDL NYC 10-12-8301184
Sign Group: Fire Department Signs, Fire Alarm Signs, F.A.C.P. Inside Signs, Alarm Panel Signs, Red Background Signs, Reflective Signs, FACP Inside Signs
This is a reflective aluminum “FIRE ALARM CONTROL PANEL INSIDE” SIGN with holes for installation.In NYC use/post sign to locate FIRE ALARM PANEL F.A.C.P & inform tenants/owners/Fire Department Crew in multi unit facilities with aluminum reflective signs
Our FIRE ALARM CONTROL PANEL INSIDE reflective signage comes with four pre-drill holes, which allow you to either use screws and install aluminum sign on walls behind relevant equipment or use Jack Chain/Sturdy Wire and install sign on the equipment it refers to, in which case you can simply hang it where it belongs.
Install a FIRE ALARM CONTROL PANEL INSIDE reflective aluminum sign to stay compliant with the relevant laws, regulations and recommendations in force in NYC. Maintain the safety levels required by different federal and municipal agencies and institutions that observe and enforce the law.
This is a sturdy FIRE ALARM CONTROL PANEL INSIDE reflective aluminum sign with RED background, WHITE letters and 4 holes for heavy duty installation. It is a size 7''X10'' aluminum reflective sign. It is 0.02 inches thick. It is a sign made of sturdy aluminum.
Automatic Sprinkler control valve signs – These signs are designed to inform the fire department of the location and designation of the valve of the flow of water from mainline to each zone.
The FACP is the controlling component of the fire alarm system. The panel receives information from devices designed to detect and report fires, monitors their operational integrity and provides for automatic control of equipment, and transmission of information necessary to prepare the facility for fire based on a predetermined sequence. The panel may also supply electrical energy to operate any associated initiating device, notification appliance, control, transmitter, or relay. There are four basic types of panels: coded panels, conventional panels, addressable panels, and multiplex systems
Frequently asked questions:
How does fire alarm control panel work? Conventional panels represent a building as a series of regions known as detection zones. When a smoke detector or pull switch in a zone activates, the electrical current to the fire alarm panel changes, and the control panel indicates that a device somewhere in that zone has been activated.
What is the difference between an annunciator panel and a fire alarm control panel? If the fire alarm panel is the heart of the system, then the annunciator is the interface that actually shows you what's going on, and where. Fire alarm annunciators are used to pinpoint the trouble spots, and help the staff monitor the entire building
What information will the fire alarm panel be used to display? In an alarm condition, the fire alarm panel indicates where the alarm originated. The alarm panel can be reset once the device which initiated the alarm is reset, such as returning the handle of a manual pull station to its normal position
What are the components of a fire alarm system? Most fire alarm systems are made up of the following components:
ü Fire Alarm Control Panel (FACP)
ü Primary and Backup Power Supply.
ü Alarm Initiating Device.
ü Alarm Notification Device.
ü Remote Control and Display Panels.
ü Building Safety Interface
Shipping and Handling Cost:
Our Shipping is fixed whether you buy 1 item or 20 items (We ship within USA only) - do not miss this opportunity to buy all signs needed at no additional shipping cost.
We are required to collect sales tax on any product sold on this site and shipped to an address in New York. The sales tax is 8.875 percent.
The requirements for sign content are determined by intended use and by applicable regulation. The BUYER is responsible for determining the appropriate content for a sign or package of signs. Firedepartmentsigns.nyc makes no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. Please review terms and conditions prior to purchase.
We provide both signs required by city and state regulation and Fire Department Signs, Fire Alarm Signs, Alarm Panel Signs, Red Background Signs and Reflective Signs
For more information about what is required, see the laws that are referenced and the rules applicable to your city and state. This page is for informational purposes only and is not intended as legal advice, professional advice or a statement of law. You may wish to consult with an attorney.
Find us on:
This is an aluminum "FIRE ALARM CONTROL PANEL INSIDE" sign with holes for heavy duty installation. In NYC use/ post sign to inform tenants/owners/guests/officers/Fire Department Crew of FACP location in facility with proper HPD designation